‘D’ Handle Only for Fencing Spade
- Replacement ‘D’ Handle for the Strainrite short and long handle spade
- Redesigned for durability
- Ergonomic Grip ‘D’ Handle
- Made in New Zealand
Mostrando 1–40 de 84 resultados
4 Arm Post Driver – 150mm
- Features four handles – can be operated by four people simultaneously.
- Reduced transfer of shock back through the handles to your hands
- Inside diameter 150mm nominal
Ace Of Spades Long Handle – 1420mm
- Premium quality NZ made fencing spade
- Tough Heat Treated Steel Blade
- Additional tube in shaft for increased strength & balance
- Shaft Diameter 33mm
- Overall Length 1420mm
- Spade Head Width 170mm
- Spade Head Height 240mm
Ace Of Spades Short Handle – 1220mm
- Premium quality NZ made fencing spade
- Tough Heat Treated Steel Blade
- Additional tube in shaft for increased strength & balance
- Spade Head Width 170mm
- Shaft Diameter 33mm
- Spade Head Height 240mm
- Overall Length 1220mm
Bahco Wire Cutter
- High performance handles with superior grip
- Forged with cutting edges for piano, hard and soft wire
- High leverage giving exceptional cutting performance with minimum effort
- Made in Spain
Crimp Sleeves 2.5mm – Container of 1000
- Genuine NZ made 2.5mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 1.6mm to 2.5mm fencing wire
- Container of 1000
Crimp Sleeves 2.5mm – pottle of 100
- Genuine NZ made 2.5mm Wire Crimp Sleeves
- Water resistant grit adhesive for all weather application.
- For use on 1.6mm to 2.5mm fencing wire.
- Pottle of 100
Crimp Sleeves 2.5mm – Pottle of 500
- Genuine NZ made 2.5mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 1.6mm to 2.5mm fencing wire
- Pottle of 500
Crimp Sleeves 3.15mm – Container of 1000
- Genuine NZ made 3.15mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
- Container of 1000
Crimp Sleeves 3.15mm – Pail of 500
- Genuine NZ made 3.15mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
- Pail of 500
Crimp Sleeves 3.15mm – Pottle of 50
- Genuine NZ made 3.15mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
- Pottle of 50
Crimp Sleeves 4.00mm – Bag of 50
- Genuine NZ made 4.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
- Bag of 50
Crimp Sleeves 4.00mm – Container of 1000
- Genuine NZ made 4.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
- Container of 1000
Crimp Sleeves 4.00mm – Pottle of 50
- Genuine NZ made 4.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
- Pottle of 50
Crimp Sleeves 5.00mm – Container of 1000
- Genuine NZ made 5.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 7 gauge Wire and 2.5mm (12 gauge) Mild Steel Barbed Wire
- Container of 1000
Crimp Sleeves 5.00mm – Pottle of 50
- Genuine NZ made 5.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 7 gauge wire and 2.5mm (12 gauge) Mild Steel Barbed Wire
- Pottle of 50
Crimp Sleeves 5.00mm – Pottle of 500
- Genuine NZ made 5.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 7 gauge Wire and 2.5mm (12 gauge) Mild Steel Barbed Wire
- Pottle of 500
Crimp Sleeves Barbed Wire – Pottle of 50
- Genuine NZ made Barbed Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 2.50mm (12 gauge) Mild Steel Barbed Fencing Wire
- Pottle of 50
Crimp Sleeves Electric – Container of 1000
- Genuine NZ Made 2.5mm Electric Crimp sleeves
- For use on 1.6mm to 2.7mm (16 to 12.5 gauge) Fencing Wire
- Crimp 4-5 times with Eze-Crimp or Ultra-Crimp Fencing Tool to ensure joint strength
- Container of 1000
Crimp Sleeves Electric – Pottle of 50
- Genuine NZ Made 2.5mm Electric Crimp Sleeves
- For use on 1.6mm to 2.7mm (16 to 12.5 gauge) Fence Wire
- Crimp 4-5 times with Eze-Crimp or Ultra-Crimp Fencing Tool to ensure joint strength
- Pottle of 50
Double Digger
- Cuts digging time in half
- Slightly tapered hardwood handles.
- Stainless Steel Blades
- Overall Length 1800mm
EzePull 4in1 Fencing Tool
The original EzePull fencing tool for staple pulling, wire cutting, wire stripping and wire joining.
- Hardened cutlery grade steel jaws
- Lightweight and compact
- Comfortable rubber grips
- Strong double action with over-centre lever for superior strength crimps
Compatible with Strainrite Crimp sleeves ONLY
- 2.50mm Crimp Sleeves Only
Note: Using 3rd party crimp sleeves will void your tools warranty
EzePull UltraCrimp 5in1 Multi Tool
The Genuine Ezepull Fencing Tool that does it all: Staple pulling, wire cutting, wire stripping and wire joining.
- Hardened cutlery grade steel jaws
- Lightweight and compact
- Comfortable rubber grips
- Strong double action with over-centre lever for superior strength crimps
Compatible with Strainrite Crimp sleeves ONLY
- 2.50mm Crimp Sleeves
- 3.15mm Crimp Sleeves
- 4.00mm Crimp Sleeves
- 5.00mm Crimp Sleeves
- Electric Crimp Sleeves
- Barbed Wire Crimp Sleeves
Note: Using 3rd party crimp sleeves will void your tools warranty
Fastlok Wire Joiners – Pottle of 20
- For 2.5mm to 3.0mm High Tensile Wire
- No tools required
- Reusable
- Pottle of 20
Fencing Spade – Long Handle
- 1425mm total length
- Bisalloy Steel with a straight cutting edge
- Shock absorbing ergonomic comfort grip
- Spade Head Width 170mm
- Spade Head Height 210mm
- Made in New Zealand
Fencing Spade – Short Handle
- 1200mm total length.
- Bisalloy Steel with a straight cutting edge
- Shock absorbing ergonomic comfort grip
- Spade Head Width 170mm
- Spade Head Height 210mm
- Made in New Zealand
Gudgeon Guide
Well Hung Gates Everytime
Easily lines up against your fence post, acting as a jig. The guide allows your drill to make perfect gudgeon holes, set in the right place every time. Perfect for novices through to contractors.
Free up your hands
Using the chain hook to support the top guide and the adjustable bungee for the bottom guide, we give you the flexibility to free up both hands to install the chain clamps, allowing you to set your gate height in position with ease.
New Zealand Made
Proudly 100% New Zealand designed and manufactured, ensuring you get the Strainrite Quality every time.
Hardex HD 450 Lubricant & Penetrant Spray Spray
An all-purpose and versatile industrial performance lubricant spray that works well on metals, rubber, wood, glass, painted surfaces and other substances. HARDEX® 4D penetrates quickly to loosen corroded nuts, bolts, fastener screws and sliding parts. It also works as a rust inhibitor and moisture retardant to protect and lubricate practically every mechanical parts and components.
Recommended Applications:
Multi-purpose lubricant for household, office and industries use.
Harpoon 55mm Winged Ground Anchor
Fast installation with mechanical post drivers
Provides immediate high load capacity
Suitable for a range of soil conditions
Suits organic compliant application
Harpoon Ground Anchor
- Fast installation with a mechanical post driver
- Provides immediate high load carrying capacity
- Designed for use in tough rocky ground
- Ideal for use in vineyards using Klima cane pruning equipment
- Patent Pending
J-Bolt Wire Clamp – Bag of 10
- Quality NZ Made J-Bolt Wire Clamp
- For use on all live earth wire connections
- Bag of 10
KNIPEX Cobra Hightech Water Pump Pliers – 250mm
- Push the button for adjustment on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
- Box-joint design for high stability due to double guide
- Reliable catching of the hinge bolt: no unintentional shifting
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, multi stage oil-hardened
KNIPEX Cobra Hightech Water Pump Pliers – 300mm
- Push the button for adjustment on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
- Box-joint design for high stability due to double guide
- Reliable catching of the hinge bolt: no unintentional shifting
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, multi-stage oil-hardened
KNIPEX Ergo Combo Plier
- Same features as the Knipex Std Combo Plier
- 35% greater leverage than standard pliers of the same length
- Two colour ergonomic dual component handles
KNIPEX Plier Wrench – 250mm
- Adjustable tightening tool
- Excellent for gripping, holding, pressing and bending workpieces
- Replaces the need for sets of metric and imperial spanners
- Smooth jaws for damage free installation of plated fittings
KNIPEX Plier Wrench – 300mm
- Adjustable tightening tool
- Excellent for gripping, holding, pressing and bending workpieces
- Replaces the need for sets of metric and imperial spanners
- Smooth jaws for damage free installation of plated fittings
KNIPEX Standard Combination Plier
- Powerful gripping, bending & pulling
- 35% greater leverage than standard pliers of the same length
- Suitable for cutting all common wire types
KNIPEX Wire Cutter – Scalloped Jaw
- Induction-hardened precision cutting edges.
- Cutting edge hardness approximately 64HRc.
- Features Scalloped Jaw for improved cutting performance
KNIPEX Wire Cutter – Straight Jaw
- Induction-hardened precision cutting edges.
- Traditional Straight Jaw design
- Ergonomically styled handles
Mango de Trinquete Universal
- Para uso con los tensores de alambres Strainrite y otros más comunes
- Pasador de trinquete cargado por resorte
- Enchapado en zinc de oro para mayor protección contra la corrosión